Lesson 22 Tut3
|First Steps: Lesson 22 Tut3|
In this lesson, we explain the so-called input assignment. This allows external signals such as DMX-in for control of DMXControl 3.
Lesson 22: Input Assignment
By means of Input Assignment external signals such as DMX-in can be used for control of DMXControl 3. This function is similar to the DMX In / MIDI remote control of DMXControl 2.
You find this tool here: Settings -> Application Settings -> Input Assignment
You can simply drag and drop the available inputs on the left side to the logical channels and control structures on the right side.
|Picture 1: Input Assignment Window|
In the above example, the two front lights (white lights - generic dimmer) were associated with DMX-IN channel 1 and 2, so you can use an external board to control this dimmer channels. For another example shown above, the manual beat was associated with the first cuelist.
|In the beta version, there is no MIDI support.|
1) Perform the above example with your own project (assignment of the first two channels of DMX-In)
|table of content|